The Hardox wear-resistant steel plate, Weldox high-tensile steel plate, and Domex high-tensile steel plate handled
by Kyowa is superior to other steel materials in terms of hardness, strength, and ductility.
These characteristics not only improve the performance of equipment manufactured from these materials,
but also permit use over longer periods of time, extend maintenance cycles, and reduce equipment weight.
These materials may allow us to provide you with the equipment you had thought impossible.
Feel free to contact us. We may be able to help.
|
| >>
Inquiries here |
|
|
■Turning and milling |
|
|
HX500 bolt DSCN1597
|
HX500 machined bolts
|
HX400 machined item
|
HX500 wheels
|
HX500 positioning push
|
HX400-30t scrap press ram
|
HX400 work clamp breaker
|
HX400 press rails
|
HX450-30t machined press liner
|
HX450-30t scrap press liner
|
HX500-8t polished liners
|
HX500 cutter
|
HX500 crusher cutter
|
HX500-60t reaction torque wrench
|
HX500 reaction torque wrench
|
HX550 crusher cutter
|
HX550 cutter
|
HX600 pressure-resistant flange
|
HX600 crusher cutter
|
HX550-40t cutter
|
|
HX400-50t scraper liner
|
HX400 jig bracket and pad
|
HX500 wire-cut items
|
HX550 welding and machining
|
HX500-19t item edged and countersunk
|
HX500 shaft
|
Toolox33 deep-drilled shaft
|
|
|
|
|
■Drilling, countersinking, threading |
HX600 pressure-resistant flange
|
HX500-5t polished liners (1)
|
HX500-8t polished liners (2)
|
HX500-19t item edged and countersunk
|
HX400 arm liners
|
HX500 crusher cutter
|
HX600 liner
|
HX500-6t item
|
HX400-12t discharge screen
|
HX500-16t sifter screen
|
HX600 laser cut, machined, and threaded center plate
|
DX700-4t bent and laser bent item
|
|
|
■Water-cooled flame cutting |
|
|
HX500-25t sprocket
|
HX600 flame-cut item
|
|
|
HX550 flame-cut item
|
HX600 flame-cut items
|
|
|
DX700-4t bent and laser-cut item
|
Weldox edged items
|
Weldox plates
|
|
|
|
■Laser cutting |
|
|
 |
 |
 |
 |
|
|
|
|
■Bending |
|
|
HX400 service tank
|
HX450 fabricated pipe bend
|
HX450-4t square-round short connector
|
HX450-8t bent screen
|
HX400-16t screen
|
HX400 chute liner
|
HX450-4t chute
|
HX500 chute
|
HX500-9t bent item
|
HX500-12t item
|
HX550 chute
|
HX500 short connector replacement
|
HX400 fabricated screw
|
HX450 screw sections
|
HX450 fabricated screw component
|
HX450-4t bent channel
|
Weldox-6t frame for casting light-weight pots
|
DX700 bent channel
|
Example of bent DX700 material
|
|
|
|
|
■Welding |
|
|
HX400 scrap press
|
HX450 hopper
|
Conveyor casing
|
HX600 conveyor liner
|
HX500-12t impact plate
|
HX500 casing liner
|
HX450 winch hammer keeper box
|
HX450 cutting fork breaker
|
HX400-12t conveyor guide rail
|
HX400-6t chute
|
HX500-12t SR grate
|
|
|
|
|
|
| |
|
▲Return to top of page |
